Coating Industry News
| Polyurethane Roof Coating provides vapor barrier. Wed, 22 Jun 2011 08:27:38 -0500 | Used to protect spray polyurethane foam roofing systems, one-component StrataCoat 1220 is moisture-cured, aromatic, and fire retardant. As base coat, product provides tensile strength for hail resistance and protection against foot traffic. Low permeability enables coating to resist moisture vapor over cold storage facilities. Available in 5 and 55 gallon containers, Stratacoat 1220 comes in dark gray and light gray.
This story is related to the following: Paints and Coatings Safety and Security Equipment Search for suppliers of: Roof Coatings | Polyurethane Coatings | Vapor Barriers |
| Aliphatic Polyurea Coating provides crack bridging. Thu, 19 May 2011 08:33:48 -0500 | Designed to prevent yellowing and gloss reduction from UV light, EnviroLastic AL offers elastomeric performance by bridging gaps up to 1/8 in. Combination of weatherability, crack bridging capability, and adhesion properties make USDA-approved, seamless coating system suitable for interior/exterior walls and ceilings as well as exterior tanks and silos. Applied at thicknesses of 30-250 mils, low-odor, zero-VOC, 100% solids coating offers 3 min tack-free time and 24 hr full cure.
This story is related to the following: Paints and Coatings Materials and Material Processing Sponsored by: UNIVERSAL METALS CO - Unparalleled quality and service, with 30 years in the metal supply business. Green & Clean Search for suppliers of: Protective Coatings | Polyurea Coatings | Aliphatic Chemicals |
| Aluminized Polyurea Roof Coating optimizes energy efficiency. Thu, 09 Dec 2010 08:38:57 -0500 | Rhino(TM) Eco-Coat(TM) helps to reflect sunlight off roof and to improve energy efficiency of building. Aromatic, zero VOC, spray-applied coating for commercial and industrial roofs contains UV stabilizers and leafing aluminum pigment for UV stability. High tensile strength and abrasion resistance enables 2-component product to resist hail, mechanical impact, and pest infestations. It can be used as top coat over Rhino(TM) SPF or as coating for primed metal or concrete roofs.
This story is related to the following: Paints and Coatings Green & Clean Search for suppliers of: Volatile Organic Compound (VOC) Compliant Coatings | Roof Coatings | Polyurea Coatings |
| Polyurea Spray Liner System eliminates corrosion. Wed, 14 Jul 2010 08:31:29 -0500 | Designed to prolong life of equipment used in bulk material handling operations, such as aggregate handling, mining, and concrete handling, Rhino Hyde Spray 8500AR is spray-applied to virtually any thickness and creates seamless membrane that eliminates corrosion. Product is applied with 2-component high-pressure impingement mixing spray machine and is suitable for screen deck grids, slurry tanks, weigh hoppers, and chute liners.
This story is related to the following: Materials and Material Processing Sponsored by: UNIVERSAL METALS CO - Unparalleled quality and service, with 30 years in the metal supply business. Material Handling and Storage Sponsored by: Dalmec Inc - PNANewsletter Ad Paints and Coatings Search for suppliers of: Polyurea | Bulk Container Liners | Polyurea Coatings | Corrosion Resistant Coatings |
| Protective Floor Coatings offer UV and abrasion resistance. Wed, 23 Jun 2010 08:35:11 -0500 | Able to cure in all weather and temperature applications, ASPART-X(TM) Coatings provide UV protection that does not yellow or fade. This zero VOC, 100% solid, aliphatic, pure polyurea coating is resistant to impact, abrasion, and chemical damage and can be configured in various non-skid finishes. Engineered as topcoat for polyurea and polyurethane systems, proiduct can also be used as stand-alone coating over properly prepared substrates.
This story is related to the following: Paints and Coatings Search for suppliers of: Impact Resistant Coatings | Polyurea Coatings | Chemical Resistant Coatings | Abrasion Resistant Coatings | Protective Coatings |
| Low-VOC Moisture-Cure Urethane Coating is chemical resistant. Thu, 14 Jan 2010 08:32:00 -0500 | With low temperature cure at 20ºF and application in conditions up to 85% relative humidity, Cor-Cote HB Urethane provides 4 hr return to service and can be applied on concrete, as well as steel substrates. Reinforced with micaceous iron oxide, it delivers high abrasion resistance, film integrity, and edge retention qualities. Product is suited for municipal and industrial wastewater treatment facilities, including clarifiers, settling tanks, wet wells, and grit chambers.
This story is related to the following: Paints and Coatings Chemical Processing and Waste Management Search for suppliers of: Abrasion Resistant Coatings | Low Volatile Organic Compound (VOC) Coatings | Moisture Cure Coatings | Steel Coatings | Urethane Coatings | Cement & Concrete Coatings | Corrosion Resistant Coatings | Industrial Coatings | Tank Coatings |
| Polyurea Primer can be applied to concrete and steel. Wed, 30 Sep 2009 09:02:54 -0500 | Fast drying Envirolastic® LT Primer is low-viscosity primer that can be applied in temperatures as low as 0ºF. At 77ºF, surfaces can be recoated after 1 hr, and at 40ºF, surfaces can be recoated after 5 hr. Suited for use with polyurea and polyurethane topcoats, primer offers long pot life for brush/roll applications and minimizes likelihood of irregularities in coating film caused by outgassing from concrete substrate. It can be applied via airless spray.
This story is related to the following: Paints and Coatings Search for suppliers of: Cement & Concrete Coatings | Steel Coatings | Polyurea Coatings | Primers |
| Coatings offer properties beneficial for medical devices. Thu, 18 Jun 2009 08:30:09 -0500 | Suited for use in medical devices, hydrophilic coatings are intended to combine lubricity and hemocompatibility with mechanical properties of polyurethane. Formulation exhibits minimal swelling and is optimized for strength/durability. Aqueous polyurethane dispersions are of solvent-free nature with low viscosity, while solvent-borne polyurethane solutions are characterized by stability and wet strength.
This story is related to the following: Paints and Coatings Materials and Material Processing Sponsored by: UNIVERSAL METALS CO - Unparalleled quality and service, with 30 years in the metal supply business. Search for suppliers of: Medical Device Coatings | Polyurethane Coatings | Aqueous Dispersions |
| Polyurethane Enamel offers environmentally safe finish. Mon, 23 Mar 2009 08:34:17 -0500 | Spectracron 320 2-component, high-solids enamel can be sprayed as low-gloss smooth coat or textured/spattered to provide custom finish that hides various surface imperfections. It contains no hazardous air pollutants and less than or equal to 2.8 lb/gal VOC output when applied. Enamel also features optimized mar, abrasion, and chemical resistance as well as hardness and flexibility.
This story is related to the following: Paints and Coatings Search for suppliers of: Enamels | Polyurethane Coatings | Mar Resistance Coatings | Industrial Coatings | Chemical Resistant Coatings | Abrasion Resistant Coatings |
| Waterborne Polyurethane Coatings suit concrete flooring . Fri, 20 Feb 2009 08:37:08 -0500 | Offering environmentally friendly alternative to solvent-based polyurethane coatings, 2-component waterborne polyurethane coatings formulated with Bayhydur® and Bayhydrol® UV resins contain ultra-low VOCs and are suited for both indoor and outdoor applications. Products are also odorless, UV light stable for resistance to weathering, non-yellowing, hot-tire resistant, and chemical resistant.
This story is related to the following: Paints and Coatings Architectural and Civil Engineering Products Search for suppliers of: Water Borne Coatings | Polyurethane Coatings | Floor Coatings |
| Polyester Urethane suits industrial and marine applications. Tue, 05 Aug 2008 07:44:49 -0500 | Suited for interior/exterior use in industrial, marine, and commercial applications, Polylon HP Polyurethane provides high gloss and color retention as well as resistance to chemicals, abrasion, and impact. High-solids solution, with VOC level under 250 g/L, comes in range of colors as 2-component polyester-aliphatic urethane coating. It is also resistant to splashes, spillage, and fumes from dilute acids, alkalis, solvents, and fuels.
This story is related to the following: Paints and Coatings Search for suppliers of: Polyurethane Coatings |
| Acrylic Polyurethane has water-based formulation. Tue, 05 Aug 2008 07:44:49 -0500 | Featuring Ozone Transport Commission (OTC)-compliant and Hazardous Air Pollutant (HAPS)-free formulation, Waterbased Acrolon 100 retains appearances over range of chemical, weather, and mechanical conditions. It is environmentally friendly, has VOC level under 100 g/L, and promotes color and gloss retention. Along with various marine and industrial applications, areas of use can include USDA-inspected facilities.
This story is related to the following: Paints and Coatings Search for suppliers of: Polyurethane Coatings |
| Acrylic Polyurethane Coating features VOC of less than 50 g/L. Wed, 16 Jul 2008 07:35:51 -0500 | Meeting performance properties of solvent-borne systems without associated health and safety hazards, Aqua - Thane 2K water-borne coating exhibits abrasion, solvent, and chemical resistance including Skydrol, and maintains hardness. Film build of 4-8 mil wet is achieved without foaming, gassing, or flow problems. HAPS free system offers adhesion to steel, aluminum, galvanized metals (both electroplated and hot-dipped), and various stainless steel, PVC, and carbon/fiberglass composites.
This story is related to the following: Green & Clean Chemical Processing and Waste Management Material Handling and Storage Sponsored by: Dalmec Inc - PNANewsletter Ad Paints and Coatings Search for suppliers of: Environmental Coatings | Abrasion Resistant Coatings | Acrylic Coatings | Chemical Resistant Coatings | Polyurethane Coatings | Water Borne Coatings | Coating Systems |
| Polyurethane Raw Materials suit exterior automotive coatings. Thu, 22 May 2008 08:03:00 -0500 | Polyurethane raw materials can be used to formulate self-healing coatings that are scratch- and chemical-resistant, fast-curing, and meet VOC regulations, such as high solids and waterborne coatings. Offering high reactivity and full crosslinking even at low-temperature curing, 2-component polyurethane coatings include hydrogen bonds that allow for thermoplastic flow to relieve stress and allow self-healing of defects.
This story is related to the following: Paints and Coatings Chemical Processing and Waste Management Materials and Material Processing Sponsored by: UNIVERSAL METALS CO - Unparalleled quality and service, with 30 years in the metal supply business. Search for suppliers of: Automotive Coatings | Polyurethane Coatings | Polyurethane |
| Urethane Coating targets exterior applications. Tue, 13 May 2008 07:38:59 -0500 | Two-component, high-gloss Envirothane® 550 is suited for industrial and commercial applications requiring color retention as well as UV, chemical, abrasion, and moisture resistance. Product is available in 22 standard colors, including 5 safety colors.
This story is related to the following: Green & Clean Chemical Processing and Waste Management Paints and Coatings Search for suppliers of: Urethane Coatings | Chemical Resistant Coatings |
| Urethane Topcoats meet stringent VOC requirements. Thu, 13 Mar 2008 07:35:33 -0500 | With VOCs below 250 g/L, WearGuard - CRU(TM) 250 Topcoats meet VOC requirements of LADCO, OTC, and Chemicals Control Branch of Environment Canada. Products offer UV light stability, light reflectivity, and ability to withstand Skydrol®, jet fuels, and other industrial chemicals. Available in white, light gray, and gray, coatings come in 100% aliphatic, non-yellowing formula to maintain appearance over time.
This story is related to the following: Green & Clean Chemical Processing and Waste Management Paints and Coatings Search for suppliers of: Topcoat Coatings | Chemical Resistant Coatings | Urethane Coatings |
| Thick Film Coating protects roofing in hurricane zones. Tue, 04 Mar 2008 07:41:21 -0500 | Formulated specifically to protect metal or concrete industrial roof systems, Baytec® SPR 185A FR is certified for use in high-velocity hurricane zones and has passed UL790 test for fire resistance of roof covering materials. Spray system stands up to demanding environments and offers resistance to ozone, hydrolysis, and many chemicals. Because it is spray applied, Baytec SPR 185A FR eliminates time-consuming application process of rolled sheet.
This story is related to the following: Paints and Coatings Search for suppliers of: Roof Coatings | Thick Film Coatings | Polyurethane Coatings |
| Wipe-On Polyurethane meets VOC requirements. Mon, 18 Feb 2008 07:37:20 -0500 | Intended for interior applications, Jel'd Poly Kote 275 contains less than 275 g/l of Volatile Organic Compounds. It can be applied with cloth, requires no sanding, and can be re-coated within 2-4 hr. Product does not run or drip and is often used on overhead work and intricate surfaces such as stairway railings and balusters. Jel'd Poly Kote is available matte only, however, gloss level increases with each successive re-coat.
This story is related to the following: Paints and Coatings Search for suppliers of: Polyurethane Coatings |
| Clear Urethane Coating is ANSI/ESD-S20.20 compliant. Wed, 21 Nov 2007 07:42:03 -0500 | Licron Crystal(TM) is permanent static dissipative coating that adheres to metal and plastic surfaces, operates from 0-100% humidity, and maintains 107-109 <font face='Symbol'>W</font> resistivity. It can convert standard bumpers, bins, tools, and other surfaces into ESD-safe products. Applications include electronic assembly work stations, bins, carts, and trays, packaging for sensitive components, production conveyors and bumpers, and static protection for electronic devices.
This story is related to the following: Chemical Processing and Waste Management Paints and Coatings Search for suppliers of: Clear Coatings | ESD Coatings | Aerosol Coatings | Protective Coatings | Urethane Coatings |
| Polyurethane Coating suits athletic/pedestrian floors. Fri, 19 Oct 2007 07:44:17 -0500 | CHEMTHANE 3900 aliphatic polyurethane coating has 1:1 mix ratio and provides abrasion and scuff resistance. It withstands high temperature from 180-250°F, and can be applied on surface with temperatures from 45-120°F. Weather- and impact-resistant coating also resists effects of gasoline, oils, anti-freeze, and salts while providing slip and stain resistance. It can be applied with either airless spray or high pressure plural component system.
This story is related to the following: Paints and Coatings Architectural and Civil Engineering Products Search for suppliers of: Abrasion Resistant Coatings | Anti-Slip Coatings | Non-Slip Floor Coatings | High Temperature Coatings | Polyurethane Coatings |
Page last modified
Tuesday, December 08, 2009 1:36:20 PM
